The RCP-2000 Series are state of the art AC/DC front end rectifiers with 1U compact size and 21.4W per cubic inch of high power density. They can provide up to 2000W per unit for servers, information technology equipment, networking, telecommunications, and a wide range of industrial applications using distributed power architecture. Equipped with hot-swap function and PMBus communication protocol, RCP-2000 Series units can be assembled in RKP-1U 19" racks and controlled and monitored by an external device such as a PC or monitoring unit RCP-CMU1.
The RKP-1U is a low profile 19 inch power rack designed for housing RCP-2000 power supplies. Up to 3 power supplies per rack achieve a total of up to 6000W of power.
Up to three racks can be operated in parallel for higher wattage applications.
Features include hot swap operation, built in PMBus serial communication, remote on/off control and remote sense function.
Controller unit RKP-CMU1 can be mounted in a rack space for controlling and monitoring up to 32 RCP-2000 units.
RKP-CMU-1 is a fully digitalized control and monitoring unit for the RCP-2000 power system. Up to 32 RCP-2000 units can be handled by one RKP-CMU-1. Equipped with USB, RS-232 and Ethernet interface, it can be connected locally to a PC or remotely via GSM modem to execute the control and monitoring tasks. With 4 built-in configurable relay contacts, users can flexibly monitor and intervene for specific events .
The RM Series provides clean, filtered and regulated voltage. Suitable for all electronic devices, including access controls, electromagnetic locks and CCTV. This series is designed with up to 16 individual fused outputs for powering all electronic devises, enabling easy installation and long term reliability.
The RPB-1600 Series are intelligent 1600W battery chargers suitable for lead-acid and Li-ion batteries. Units have built-in active PFC and have current sharing capabilities which can provide up to 4800W for higher power applications.
RPB-1600 Series battery chargers have programmable output voltage and current and a high power density of up to 25W per square inch. Units in this series can withstand a 5 second 300VAC input surge and are cooled by inbuilt DC fan.
Short circuit, over voltage, over temperature and low battery protections are designed into these battery chargers.
Conformal coating is available if required.